Sold Items
608 items found in Sold Items
SOLD - 5x Marples / Sorby Chisel Handles (Boxwood)
chisels
- £0.00
4x Marples chisel handles and 1x Sorby chisel handle. Ferrule Sizes: 14mm, 17mm, 17mm, 17mm, 25mm Longest Handle Length: 160mm Condition: some have pre-drilled holes, please see photos for condition. For a wide range of replacement chisel handles and replacement ferrules please visit toolnut.co.u...
SOLD - Stanley Block Plane - No. 9 1/2
planes
- £0.00
An old Stanley 9 1/2 block plane. For general information about this tool see the Stanley 9 1/2 Plane Review on FindMyTool.co.uk Condition: all parts move freely, please see photos for condition.
SOLD - Record Block Plane No. 018
planes
- £0.00
A superb, little used snap knuckle block plane no. 018 made in England by Record. Comes complete with the original Record box. It is very hard to find these in this condition these days. Condition: please see photos for condition.
SOLD - Stanley Cabinet Scraper No. 81
planes
- £0.00
An old Stanley cabinet scraper no. 81. Fitted with a 'Stanley SW, Made In USA' (with Sweetheart logo) scraper blade and an extra scraper blade. Condition: the base moves due to three of the screws not locating so probably needs a new base or possibly longer screws, please see photos for condit...
SOLD - Stokoe Wooden Mitre Plane (Beech)
planes
- £0.00
A scarce wooden mitre plane that measures 305mm long x 75mm wide. Note: this plane has some problems, please see condition report. The front nose is marked with an upside down 'Stokoe' mark at the top. It also has what looks like an earlier makers mark which has been overstamped with the name 'G....
SOLD - Record Anvil No. 11
Other Tools
- £0.00
A good Record anvil still with its original Record trade label. The anvil is marked 'Record, No 11' on one side and 'Made In England' on the other side. Overall Length: 8” Width: 3" Height: 5" Weight: 5kg Condition: please see photos for condition.
SOLD - 4x Marples File Handles
chisels
- £0.00
4x unused Marples handles which look like they are Marples file handles. These handles have the lovely feature of still have the old Marples logo on each of them. Ferrule Internal Gap Width: 7.5mm Overall Length: 4" Condition: please see photos for condition. For a wide range of replacement chise...
SOLD - E.T.Roberts and Lee Dorchester Panel Saw - 22" - 12tpi (Beech)
Other Tools
- £0.00
A lovely old E.T.Roberts and Lee Dorchester Panel Saw, looks to have been hardly used. The saw is fitted with a hardwood handle, not 100% on the wood type, it is possibly Walnut. The medallion is marked 'Warranted Superior'. The blade is marked 'E.T. Roberts and Lee, 570, Taper Ground Thin To Bac...
SOLD - Disston Philadelphia Dovetail Saw – 10" - 15tpi (Apple)
Other Tools
- £0.00
A beautiful, old brass back Disston dovetail saw fitted with an Apple handle, The medallion is marked 'H.Disston & Sons Philad'a'. The brass spine is marked 'Henry Disston & Sons, Philada, Cast Steel Warranted'. The blade is faintly etched ‘Henry Disston & Sons, Key Stone Saw Works, P...
SOLD - Mathieson Tenon Saw - 14" - 13tpi (Beech)
Other Tools
- £0.00
A beautiful clean old brass back Mathieson tenon saw. This saw was made in the Mathieson Liverpool workshops. The spine is marked 'Alex Mathieson & Sons Ltd, Trade Mark, Liverpool, Warranted Cast Steel' with the crescent moon and star logo. TPI: 13 Blade length: 14” Condition: blade is str...
SOLD - Tyzack Dovetail Saw - 8" - 18tpi (Beech)
Other Tools
- £0.00
A good clean, brass back Tyzack dovetail saw. The handle, brass spine and blade are all marked with Tyzack. The handle is marked 'W Tyzack Sons & Turner Ltd, Sheffield'. The brass spine is marked 'W Tyzack Sons & Turner, Sheffield'. The blade is marked 'W Tyzack Sons & Turner Ltd, The...
SOLD - Wooden Bullnose Plane (Beech)
planes
- £0.00
A lovely, tactile, old bullnose plane that measures 106mm long x 46mm wide. This plane has a good thick cutter which is marked 'James Howarth, Sheffield'. These types of plane are fairly scarce. Condition: a couple of small shrinkage splits, please see photos for condition.
SOLD - Marples Sash Pocket Chisel – 51mm (2") (Beech)
chisels
- £0.00
A lovely, wide 51mm (2") sash pocket chisel made by Marples. This type of chisel features a very slender blade with a bevel on both sides. Blade width: 51mm (2") Condition: please see photos for condition.
SOLD - Chesterman Treble Leather Tape Measure No. 1533 - 33ft
measuring tools
- £0.00
An old 'Treble' leather tape measure no. 1533 in its original box. The 'Treble' range of tape measures were made by Chesterman. This is a small version with a 33ft tape. The cloth tape is marked out in feet and inches. Condition: please see photos for condition.
SOLD - Record Block Plane No. 09 1/2
planes
- £0.00
A lovely old Record 09 1/2 block plane. For general information about this tool see the Record Plane 09 1/2 Review on FindMyTool.co.uk Condition: all parts move freely, please see photos for condition.
SOLD - 14x Old Drill Bits Set
Other Tools
- £0.00
14x old drill bits in its bit roll. All of these bits came in this tool roll from a previous owner. Names includes: Ridgway (Sheffield) The Irwin (USA) Emmak (Sheffield) Footprint (Sheffield) No. 707 Sorby (Sheffield) The largest size is 1" Condition: please see photos for condition.
SOLD - Marples Mortice Gauge - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A nice old Marples mortice gauge in its box. Condition: all parts move freely; it gets tight about 5mm from the top when both points are together and tight right at the bo...
SOLD - The Billings & Spencer Co. Wrench - 9" (USA)
Other Tools
- £0.00
Made In USA, The Billings & Spencer Co., Hartford Conn. Wrench - 9in Condition: please see photos for condition.
SOLD - Record Bullnose Plane No. 077A
planes
- £0.00
An old Record 077A Bullnose rabbet plane. For general info about this tool, please see the FindMyTool.co.uk Record 077A plane review. Condition: all parts working smoothly, please see photos for condition.
SOLD - 12 Piece Marples Carving Tool Set No. 60 (Mahogany)
chisels
- £0.00
A twelve piece Mahogany handled Marples carving tools set No. 60, made in Sheffield, England. This old Marples wood carving set is housed in its original box. For general info about these tools, see the Marples Wood Carving Set No. 60 review on FindMyTool.co.uk Condition: please see photos for c...
SOLD - Old Stanley Box Scraper No. 70
planes
- £0.00
An old box scraper which looks like a Stanley box scraper no. 70. This box scraper has had the head set on the pull stroke. For general information about this tool see the Stanley Box Scraper 70 Review on FindMyTool.co.uk Condition: head set on the pull stroke, gouge mark near mouth, please see...
SOLD - Stanley Rabbet Plane No. 278
planes
- £0.00
An old Stanley 278 rabbet plane. This Stanley 278 is supplied with depth stop, Stanley cutter and a 78 fence. The cutter is marked 'PAT 10-17-16'. For general information about this plane see the Stanley 278 plane review on FindMyTool.co.uk Condition: all parts move freely, has a 78 fence, ple...
SOLD - Collectable Edward Preston Side Rabbet Plane (Beech)
planes
- £0.00
An old, collectable Edward Preston side rebate plane similar to the Record no. 2506 side rabbet plane. For general info about this tool, please see the FindMyTool.co.uk Edward Preston EP side rabbet plane review. Condition: knob has a 1cm split, please see photos for condition.
SOLD - Stanley Chamfer Spokeshave - No. 65
planes
- £0.00
An old adjustable Stanley chamfer spokeshave no. 65. This old chamfer shave retains a good Stanley, Sweetheart, Made In USA cutter and both side fences. For general info about this tool see the Stanley 65 Chamfer Shave review on FindMyTool.co.uk Condition: all parts move freely, very tiny nibbl...
SOLD - Old Rounder / Rounding Tool - 25mm - 35mm (Ash)
Other Tools
- £0.00
A good old rounder / rounding tool with Ash handles and Record spokeshave iron. The cutter has been rounded on one corner to give a lead on. The great thing about these rounders is they are designed with a standard spokeshave iron and cap such as the ones found on Stanley spokeshaves and Record s...
SOLD - Old Trapping Rounder / Rounding Tool (Beech)
Other Tools
- £0.00
A good old trapping rounder / rounding tool. The jig block you can change by removing the trapping handle, take out splitpin to remove, make your own jig. Width between sides 47mm approx. The great thing about these rounders is they are designed with a standard spokeshave iron and cap such as the...
SOLD - Old Stanley Router No. 71 (USA) (Maple)
planes
- £0.00
An old Stanley 71 hand router plane, made in USA. This old Stanley 71 router is fitted with what look to be Maple knobs. Comes with 3 cutters and depth stop (this model didn't have a fence). One of the cutters is marked 'Stanley Pat 5-14-12'. For general information about this model of plane, see...
SOLD - Stanley Beading Tool - No. 66
planes
- £0.00
An old Stanley beading tool no. 66 supplied with a fence and seven old cutters (probably original cutters). Condition: all parts move freely, the cutter shown at the bottom originally had a hook at both ends, please see photos for condition.